Angel milling cutters - glazing bead saws HSS or VHM angle milling cutters left or right execution. These cutters are usually used together with a saw blade for the main cut. The cutters set on the main saw blade clean burrs and cut the required bevel into the material.
Typical application of this tool is cutting and beveling of PVC profiles for window and door production. Machines Wegoma, Haffner, Rotox, Striffler, Pertichi etc.
Dimensions | Hole H7 | Teeth number | Angle | |
95 x 2,0 mm | 32 | 60 | left | 45° or 60° |
95 x 2,0 mm | 32 | 60 | right | 45° or 60° |
95 x 2,0 mm | 20 | 70 | left | 45° or 60° |
95 x 2,0 mm | 20 | 70 | right | 45° or 60° |
98 x 2,0 mm | 32 | 60 | left | 45° or 60° |
98 x 2,0 mm | 32 | 60 | right | 45° or 60° |
103 x 2,1 mm | 32 | 60 | left | 45° or 60° |
103 x 2,1 mm | 32 | 60 | right | 45° or 60° |
155 x 3,0 mm | 32 | 68 | left | 45° or 60° |
155 x 3,0 mm | 32 | 68 | right | 45° or 60° |
Side angle | Diameter | Thickness | Hole | Radius | Teeth Nr. |
20° | 63 | 6 | 16 | 1 | 14 |
20° | 100 | 10 | 27 | 1,5 | 18 |
25° | 63 | 6 | 22 | 1 | 14 |
25° | 80 | 10 | 22 | 1 | 16 |
25° | 100 | 14 | 27 | 1,5 | 18 |
25° | 125 | 18 | 27 | 2 | 20 |
25° | 160 | 22 | 32 | 2,5 | 22 |
30° | 63 | 8 | 22 | 1 | 14 |
30° | 100 | 14 | 27 | 1,5 | 18 |
Side angle | Diameter | Thickness | Hole | Teeth Nr. HSS M2 | Teeth Nr. Cobalt 5% |
45° | 40 | 10 | 10 | 14 | 14 |
45° | 50 | 13 | 13 | 16 | 16 |
45° | 63 | 18 | 16 | 18 | 16 |
45° | 80 | 22 | 22 | 20 | 18 |
45° | 100 | 28 | 27 | 22 | 20 |
45° | 125 | 36 | 32 | 24 | |
45° | 160 | 45 | 40 | 28 | |
50° | 40 | 13 | 10 | 14 | 14 |
50° | 50 | 16 | 13 | 16 | 16 |
50° | 63 | 20 | 16 | 18 | 16 |
50° | 80 | 25 | 22 | 20 | 18 |
50° | 100 | 32 | 27 | 22 | 20 |
50° | 125 | 40 | 32 | 24 | |
50° | 160 | 50 | 40 | 28 | |
55° | 40 | 13 | 10 | 14 | |
55° | 50 | 6 | 13 | 16 | |
55° | 63 | 20 | 16 | 18 | |
55° | 80 | 25 | 22 | 20 | |
55° | 100 | 32 | 27 | 22 | |
55° | 125 | 40 | 32 | 24 | |
60° | 40 | 13 | 10 | 14 | 14 |
60° | 50 | 16 | 13 | 16 | 16 |
60° | 63 | 20 | 16 | 18 | 16 |
60° | 80 | 25 | 22 | 20 | 18 |
60° | 100 | 32 | 27 | 22 | 20 |
60° | 125 | 40 | 32 | 26 | |
60° | 160 | 50 | 40 | 28 |
The right-hand inclined solid carbide saws or left-hand inclined solid carbide saws and HSS single angle milling cutters with diameter 15 mm - 160 mm are made on demand.
Clients may define the following parameters:
HSS or VHM equal angle milling cutters with diameter 15 mm - 160 mm are made on demand.
Clients may define the following parameters:
Top angle | Diameter | Thickness | Hole | Teeth Nr. HSS M2 | Teeth Nr. Cobalt 5% |
45° | 50 | 8 | 16 | 22 | 16 |
45° | 63 | 10 | 22 | 24 | 16 |
45° | 80 | 12 | 27 | 26 | 20 |
45° | 100 | 18 | 32 | 28 | 20 |
60° | 50 | 10 | 16 | 18 | 16 |
60° | 63 | 14 | 22 | 20 | 16 |
60° | 80 | 18 | 27 | 22 | 18 |
60° | 100 | 25 | 32 | 24 | 20 |
90° | 50 | 14 | 16 | 16 | 16 |
90° | 63 | 20 | 22 | 18 | 16 |
90° | 80 | 22 | 27 | 20 | 18 |
90° | 100 | 32 | 32 | 24 | 20 |
120° | 50 | 14 | 16 | 16 | 16 |
120° | 63 | 20 | 22 | 16 | 16 |
120° | 80 | 25 | 27 | 20 | 20 |
120° | 100 | 36 | 32 | 24 | 24 |
Dear customer, you have the opportunity to make a preliminary request for this product. In the inquiry basket you can specify your product requirements according to the table, or you can enter any questions for the sales representative. The sales representative will contact you as soon as possible.